2019年8月30日更新，建筑建材CE认证，CPR认证，Regulation (EU) No 305/2011，代替CPD认证。
hgcert update the standard
(and reference document)以下认证，上海炎栩标准技术服务有限公司提供培训和认证服务：
EN 1:1998 Flued oil stoves with vaporizing burners EN 1:1998/A1:2007
EN 40-4:2005 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
灯柱CE认证
EN 40-4:2005/AC:2006
EN 40-5:2002 Lighting columns - Part 5: Requirements for steel lighting columns
灯柱CE认证
EN 40-6:2002 Lighting columns - Part 6: Requirements for aluminium lighting columns
EN 40-7:2002 Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns
EN 54-2:1997 Fire detection and fire alarm systems - Part 2: Control and indicating equipment
EN 54-2:1997/AC:1999
EN 54-2:1997/A1:2006
EN 54-3:2001 Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders EN 54-3:2001/A2:2006
EN 54-3:2001/A1:2002
EN 54-4:1997 Fire detection and fire alarm systems - Part 4: Power supply equipment
EN 54-4:1997/AC:1999
EN 54-4:1997/A1:2002
EN 54-4:1997/A2:2006
EN 54-5:2000 Fire detection and fire alarm systems - Part 5: Heat detectors - Point detectors
EN 54-5:2000/A1:2002
EN 54-7:2000 Fire detection and fire alarm systems - Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionization
EN 54-7:2000/A2:2006
EN 54-7:2000/A1:2002
EN 54-10:2002 Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors
EN 54-10:2002/A1:2005
EN 54-11:2001 Fire detection and fire alarm systems - Part 11: Manual call points
EN 54-11:2001/A1:2005
EN 54-12:2015 Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam
EN 54-16:2008 Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment
EN 54-17:2005 Fire detection and fire alarm systems - Part 17: Short-circuit isolators
EN 54-17:2005/AC:2007
EN 54-18:2005 Fire detection and fire alarm systems - Part 18: Input/output devices
EN 54-18:2005/AC:2007
EN 54-20:2006 Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors
EN 54-20:2006/AC:2008
EN 54-21:2006 Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment
EN 54-23:2010 Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices
EN 54-24:2008 Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers
EN 54-25:2008 Fire detection and fire alarm systems - Part 25: Components using radio links
EN 54-25:2008/AC:2012
EN 179:2008 Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods
EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 295-1:2013 Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints
EN 295-4:2013 Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
EN 295-5:2013 Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for perforated pipes and fittings
EN 295-6:2013 Vitrified clay pipes systems for drain and sewers - Part 6: Requirements for components of manholes and inspection chambers
EN 295-7:2013 Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
EN 331:1998 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
EN 331:1998/A1:2010
EN 413-1:2011 Masonry cement - Part 1: Composition, specifications and conformity criteria
EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety
EN 438-7:2005 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
EN 442-1:2014 Radiators and convectors - Part 1: Technical specifications and requirements
EN 450-1:2012 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
EN 459-1:2010 Building lime - Part 1: Definitions, specifications and conformity criteria
EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
EN 492:2012 Fibre-cement slates and fittings - Product specification and test methods
EN 494:2012+A1:2015 Fibre-cement profiled sheets and fittings - Product specification and test methods
EN 516:2006 Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps
EN 517:2006 Prefabricated accessories for roofing - Roof safety hooks
EN 520:2004+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods
EN 523:2003 Steel strip sheaths for prestressing tendons - Terminology, requirements, quality control
EN 534:2006+A1:2010 Corrugated bitum
EN sheets - Product specification and test methods
EN 544:2011 Bitum
EN shingles with mineral and/or synthetic reinforcements - Product specification and test methods
EN 572-9:2004 Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
EN 588-2:2001 Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers
EN 598:2007+A1:2009 Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
EN 621:2009 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
EN 671-1:2012 Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
EN 671-2:2012 Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
EN 681-1:1996 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
EN 681-1:1996/A2:2002
EN 681-1:1996/A3:2005
EN 681-1:1996/A1:1998
EN 681-2:2000 Elastomeric Seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
EN 681-2:2000/A1:2002
EN 681-2:2000/A2:2005
EN 681-3:2000 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber
EN 681-3:2000/A1:2002
EN 681-3:2000/A2:2005
EN 681-4:2000 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements
EN 681-4:2000/A1:2002
EN 681-4:2000/A2:2005
EN 682:2002 Elastomeric Seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
EN 682:2002/A1:2005
EN 771-1:2011+A1:2015 Specification for masonry units - Part 1: Clay masonry units
EN 771-2:2011+A1:2015 Specification for masonry units - Part 2: Calcium silicate masonry units
EN 771-3:2011+A1:2015 Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
EN 771-4:2011+A1:2015 Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
EN 771-5:2011+A1:2015 Specification for masonry units - Part 5: Manufactured stone masonry units
EN 771-6:2011+A1:2015 Specification for masonry units - Part 6: Natural stone masonry units
EN 777-1:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety
EN 777-2:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety
EN 777-3:2009 Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety
EN 777-4:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety
EN 778:2009 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
EN 845-1:2013+A1:2016 Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
EN 845-2:2013+A1:2016 Specification for ancillary components for masonry - Part 2: Lintels
EN 845-3:2013+A1:2016 Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
EN 858-1:2002 Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control
EN 858-1:2002/A1:2004
EN 877:1999 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance
EN 877:1999/A1:2006
EN 877:1999/A1:2006/AC:2008
EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
EN 934-3:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
EN 934-4:2009 Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
EN 934-5:2007 Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling
EN 969:2009 Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
EN 997:2012 WC pans and WC suites with integral trap
EN 997:2012/AC:2012
EN 998-1:2016 Specification for mortar for masonry - Part 1: Rendering and plastering mortar
EN 998-2:2016 Specification for mortar for masonry - Part 2: Masonry mortar
EN 1013:2012+A1:2014 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
EN 1020:2009 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
EN 1036-2:2008 Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard
EN 1051-2:2007 Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
www.ukcace.com update
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
钢结构和铝结构的施工.第1部分:结构部件符合性评估要求
EN 1096-4:2004 Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
建筑玻璃-镀膜玻璃-第4部分: 符合性评估要求
EN 1123-1:1999 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
EN 1123-1:1999/A1:2004
EN 1124-1:1999 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
EN 1124-1:1999/A1:2004
EN 1125:2008 Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
EN 1154:1996 Building hardware - Controlled door closing devices - Requirements and test methods
EN 1154:1996/A1:2002
EN 1154:1996/A1:2002/AC:2006
EN 1155:1997 Building hardware - Electrically powered hold-op
EN devices for swing doors - Requirements and test methods
EN 1155:1997/A1:2002
EN 1155:1997/A1:2002/AC:2006
EN 1158:1997 Building hardware - Door coordinator devices - Requirements and test methods
EN 1158:1997/A1:2002/AC:2006
EN 1158:1997/A1:2002
EN 1168:2005+A3:2011 Precast concrete products - Hollow core slabs
EN 1279-5:2005+A2:2010 Glass in building - Insulating glass units - Part 5: Evaluation of conformity
EN 1304:2005 Clay roofing tiles and fittings - Product definitions and specifications
EN 1317-5:2007+A2:2012 Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
EN 1317-5:2007+A2:2012/AC:2012
EN 1319:2009 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
EN 1337-3:2005 Structural bearings - Part 3: Elastomeric bearings
EN 1337-4:2004 Structural bearings - Part 4: Roller bearings
EN 1337-4:2004/AC:2007
EN 1337-5:2005 Structural bearings - Part 5: Pot bearings
EN 1337-6:2004 Structural bearings - Part 6: Rocker bearings
EN 1337-7:2004 Structural bearings - Part 7: Spherical and cylindrical PTFE bearings
EN 1337-8:2007 Structural bearings - Part 8: Guide Bearings and Restraint Bearings
EN 1338:2003 Concrete paving blocks - Requirements and test methods
EN 1338:2003/AC:2006
EN 1339:2003 Concrete paving flags - Requirements and test methods
EN 1339:2003/AC:2006
EN 1340:2003 Concrete kerb units - Requirements and test methods
EN 1340:2003/AC:2006
EN 1341:2012 Slabs of natural stone for external paving - Requirements and test methods
EN 1342:2012 Setts of natural stone for external paving - Requirements and test methods
EN 1343:2012 Kerbs of natural stone for external paving - Requirements and test methods
EN 1344:2013 Clay pavers - Requirements and test methods
EN 1344:2013/AC:2015
EN 1423:2012 Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two
EN 1423:2012/AC:2013
EN 1433:2002 Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
EN 1433:2002/A1:2005
EN 1457-1:2012 Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods
EN 1457-2:2012 Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods
EN 1463-1:2009 Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
EN 1469:2015 Natural stone products - Slabs for cladding - Requirements
EN 1504-2:2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
EN 1504-3:2005 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
EN 1504-4:2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
EN 1504-5:2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
EN 1504-6:2006 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar
EN 1504-7:2006 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with op
EN structure with structural or non-structural reinforcement
EN 1748-1-2:2004 Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
EN 1748-2-2:2004 Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard
EN 1806:2006 Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods
EN 1825-1:2004 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control
EN 1825-1:2004/AC:2006
EN 1856-1:2009 Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 1856-2:2009 Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes
EN 1857:2010 Chimneys - Components - Concrete flue liners
EN 1858:2008+A1:2011 Chimneys - Components - Concrete flue blocks
EN 1863-2:2004 Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
EN 1873:2005 Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods
屋顶预制附件
EN 1916:2002 Concrete pipes and fittings, unreinforced, steel fibre and reinforced
EN 1916:2002/AC:2008
EN 1917:2002 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
EN 1917:2002/AC:2008
EN 1935:2002 Building hardware - Single-axis hinges - Requirements and test methods
EN 1935:2002/AC:2003建筑五金CE认证，单轴铰链
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
热轧结构钢制品，第一部分-一般技术要求
EN 10088-4:2009 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
不锈钢板、钢带技术要求
EN 10088-5:2009 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
不锈钢棒、丝、型钢技术要求
EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
热轧钢管技术要求
EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
焊接钢管技术要求
EN 10224:2002 Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
EN 10224:2002/A1:2005
EN 10255:2004+A1:2007 Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions
EN 10311:2005 Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
水和其他含水液体传送用钢管和配件的连接用接头
EN 10312:2002 Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
水包括其它液体输送用不锈钢焊接钢管 技术要求
EN 10312:2002/A1:2005
EN 10340:2007 Steel castings for structural uses
结构用钢铸件
EN 10340:2007/AC:2008
EN 10343:2009 Steels for quenching and tempering for construction purposes - Technical delivery conditions
EN 12004:2007+A1:2012 Adhesives for tiles - Requirements, evaluation of conformity, classification and designation
EN 12050-1:2001 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter
EN 12050-2:2000 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater
EN 12050-3:2000 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications
EN 12050-4:2000 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter
EN 12057:2004 Natural stone products - Modular tiles - Requirements
EN 12058:2004 Natural stone products - Slabs for floors and stairs - Requirements
EN 12094-1:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices
EN 12094-2:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices
EN 12094-3:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices
EN 12094-4:2004 Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators
EN 12094-5:2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators
EN 12094-6:2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices
EN 12094-7:2000 Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO2 systems
EN 12094-7:2000/A1:2005
EN 12094-8:2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
EN 12094-9:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors
EN 12094-10:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches
EN 12094-11:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices
EN 12094-12:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices
EN 12094-13:2001 Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves
EN 12094-13:2001/AC:2002
EN 12101-1:2005 Smoke and heat control systems - Part 1: Specification for smoke barriers
EN 12101-1:2005/A1:2006
EN 12101-2:2003 Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators
EN 12101-3:2015 Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
EN 12101-6:2005 Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits
EN 12101-6:2005/AC:2006
EN 12101-7:2011 Smoke and heat control systems - Part 7: Smoke duct sections
EN 12101-8:2011 Smoke and heat control systems - Part 8: Smoke control dampers
EN 12101-10:2005 Smoke and heat control systems - Part 10: Power supplies
EN 12101-10:2005/AC:2007
EN 12150-2:2004 Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 12209:2003 Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
EN 12209:2003/AC:2005
EN 12259-1:1999 + A1:2001 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers
EN 12259-1:1999 + A1:2001/A2:2004
EN 12259-1:1999 + A1:2001/A3:2006
EN 12259-2:1999 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies
EN 12259-2:1999/A1:2001
EN 12259-2:1999/AC:2002
EN 12259-2:1999/A2:2005
EN 12259-3:2000 Fixed firefighting systems - Components for automatic sprinkler and water spray systems - Part 3: Dry alarm valve assemblies
EN 12259-3:2000/A1:2001
EN 12259-3:2000/A2:2005
EN 12259-4:2000 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms
EN 12259-4:2000/A1:2001
EN 12259-5:2002 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors
EN 12271:2006 Surface dressing - Requirements
EN 12273:2008 Slurry surfacing - Requirements
EN 12285-2:2005 Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
EN 12326-1:2014 Slate and stone for discontinuous roofing and external cladding - Part 1: Specifications for slate and carbonate slate
EN 12337-2:2004 Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
EN 12352:2006 Traffic control equipment - Warning and safety light devices
EN 12368:2006 Traffic control equipment - Signal heads
EN 12380:2002 Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity
EN 12446:2011 Chimneys - Components - Concrete outer wall elements
EN 12467:2012 Fibre-cement flat sheets - Product specification and test methods
EN 12566-1:2000 Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks
EN 12566-1:2000/A1:2003
EN 12566-3:2005+A2:2013 Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants
EN 12566-4:2007 Small wastewater treatment systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits
EN 12566-6:2013 Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricated treatment units for septic tank effluent
EN 12566-7:2013 Small wastewater treatment systems for up to 50 PT - Part 7: Prefabricated tertiary treatment units
EN 12591:2009 Bitum
EN and bituminous binders - Specifications for paving grade bitumens
EN 12602:2016 Prefabricated reinforced components of autoclaved aerated concrete
EN 12620:2002+A1:2008 Aggregates for concrete
EN 12676-1:2000 Anti-glare systems for roads - Part 1: Performance and characteristics
EN 12676-1:2000/A1:2003
EN 12737:2004+A1:2007 Precast concrete products - Floor slats for livestock
EN 12764:2004+A1:2008 Sanitary appliances - Specification for whirlpool baths
EN 12794:2005+A1:2007 Precast concrete products - Foundation piles
EN 12794:2005+A1:2007/AC:2008
EN 12809:2001 Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
EN 12809:2001/A1:2004
EN 12809:2001/A1:2004/AC:2007
EN 12809:2001/AC:2006
EN 12815:2001 Residential cookers fired by solid fuel - Requirements and test methods
EN 12815:2001/AC:2006
EN 12815:2001/A1:2004/AC:2007
EN 12815:2001/A1:2004
EN 12839:2012 Precast concrete products - Elements for fences
EN 12843:2004 Precast concrete products - Masts and poles
EN 12859:2011 Gypsum blocks - Definitions, requirements and test methods
EN 12860:2001 Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
EN 12860:2001/AC:2002
EN 12878:2005 Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
EN 12878:2005/AC:2006
EN 12899-1:2007 Fixed, vertical road traffic signs - Part 1: Fixed signs
EN 12899-2:2007 Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
EN 12899-3:2007 Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors
EN 12951:2004 Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods
EN 12966-1:2005+A1:2009 Road vertical signs - Variable message traffic signs - Part 1: Product standard
EN 13024-2:2004 Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
建筑玻璃 热钢化硼硅酸盐安全玻璃 第2部分：合格评定/产品标准
EN 13043:2002 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
EN 13043:2002/AC:2004
EN 13055-1:2002 Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
EN 13055-1:2002/AC:2004
EN 13055-2:2004 Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
EN 13063-1:2005+A1:2007 Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance
EN 13063-2:2005+A1:2007 Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions
EN 13063-3:2007 Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys
EN 13069:2005 Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
EN 13084-5:2005 Free-standing chimneys - Part 5: Material for brick liners - Product specifications
EN 13084-5:2005/AC:2006
EN 13084-7:2012 Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
EN 13101:2002 Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity
EN 13108-1:2006 Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete
EN 13108-1:2006/AC:2008
EN 13108-2:2006 Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers
EN 13108-2:2006/AC:2008
EN 13108-3:2006 Bituminous mixtures - Material specifications - Part 3: Soft Asphalt
EN 13108-3:2006/AC:2008
EN 13108-4:2006 Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
EN 13108-4:2006/AC:2008
EN 13108-5:2006 Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
EN 13108-5:2006/AC:2008
EN 13108-6:2006 Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt
EN 13108-6:2006/AC:2008
EN 13108-7:2006 Bituminous mixtures - Material specifications - Part 7: Porous Asphalt
EN 13108-7:2006/AC:2008
EN 13139:2002 Aggregates for mortar
EN 13139:2002/AC:2004
EN 13160-1:2003 Leak detection systems - Part 1: General principles
EN 13162:2012+A1:2015 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
EN 13163:2012+A1:2015 Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification
EN 13164:2012+A1:2015 Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification
EN 13165:2012+A2:2016 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification
EN 13166:2012+A2:2016 Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification
EN 13167:2012+A1:2015 Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
EN 13168:2012+A1:2015 Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
EN 13169:2012+A1:2015 Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification
EN 13170:2012+A1:2015 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
EN 13171:2012+A1:2015 Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
EN 13224:2011 Precast concrete products - Ribbed floor elements
EN 13225:2013 Precast concrete products - Linear structural elements
EN 13229:2001 Inset appliances including op
EN fires fired by solid fuels - Requirements and test methods
EN 13229:2001/AC:2006
EN 13229:2001/A2:2004/AC:2007
EN 13229:2001/A2:2004
EN 13229:2001/A1:2003
EN 13240:2001 Roomheaters fired by solid fuel - Requirements and test methods
EN 13240:2001/A2:2004
EN 13240:2001/AC:2006
EN 13240:2001/A2:2004/AC:2007
EN 13241:2003+A2:2016 Industrial, commercial, garage doors and gates - Product standard, performance characteristics
EN 13242:2002+A1:2007 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
EN 13245-2:2008 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
EN 13245-2:2008/AC:2009
EN 13249:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
EN 13250:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
EN 13251:2016 Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
EN 13252:2016 Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
EN 13253:2016 Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
EN 13254:2016 Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams
EN 13255:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
EN 13256:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
EN 13257:2016 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
EN 13263-1:2005+A1:2009 Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
EN 13265:2016 Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
EN 13279-1:2008 Gypsum binders and gypsum plasters - Part 1: Definitions and requirements
EN 13282-1:2013 Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria
EN 13310:2003 Kitch
EN sinks - Functional requirements and test methods
EN 13341:2005+A1:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods
EN 13361:2004 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
EN 13361:2004/A1:2006
EN 13362:2005 Geosynthetic Barriers - Characteristics required for use in the construction of canals土工合成密封卷材 河道建设中使用性能
EN 13383-1:2002 Armourstone - Part 1: Specification
EN 13383-1:2002/AC:2004
EN 13407:2006 Wall-hung urinals - Functional requirements and test methods
EN 13450:2002 Aggregates for railway ballast
EN 13450:2002/AC:2004
EN 13454-1:2004 Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements
地面找平层用基于硫酸钙的粘合剂、复合粘合剂和工厂制混合物.第1部分:定义和要求
EN 13479:2017 (new) Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
焊接消耗品.金属材料熔焊用填充金属和焊剂的一般产品标准
EN 13491:2004 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
EN 13491:2004/A1:2006
EN 13492:2004 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
EN 13492:2004/A1:2006
EN 13493:2005 Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
EN 13502:2002 Chimneys - Requirements and test methods for clay/ceramic flue terminals
EN 13561:2004+A1:2008 External blinds - Performance requirements including safety
EN 13564-1:2002 Anti-flooding devices for buildings - Part 1: Requirements
EN 13616:2004 Overfill prevention devices for static tanks for liquid petroleum fuels
EN 13616:2004/AC:2006
EN 13658-1:2005 Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering
EN 13658-2:2005 Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering
EN 13659:2004+A1:2008 Shutters - Performance requirements including safety
EN 13693:2004+A1:2009 Precast concrete products - Special roof elements
EN 13707:2004+A2:2009 Flexible sheets for waterproofing - Reinforced bitum
EN sheets for roof waterproofing - Definitions and characteristics
EN 13747:2005+A2:2010 Precast concrete products - Floor plates for floor systems
EN 13748-1:2004 Terrazzo tiles - Part 1: Terrazzo tiles for internal use
EN 13748-1:2004/A1:2005
EN 13748-1:2004/AC:2005
EN 13748-2:2004 Terrazzo tiles - Part 2: Terrazzo tiles for external use
EN 13808:2013 Bitum
EN and bituminous binders - Framework for specifying cationic bituminous emulsions
EN 13813:2002 Screed material and floor screeds - Screed material - Properties and requirements
EN 13815:2006 Fibrous gypsum plaster casts - Definitions, requirements and test methods
EN 13830:2003 Curtain walling - Product standard
EN 13859-1:2010 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
EN 13859-2:2010 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
EN 13877-3:2004 Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements
EN 13915:2007 Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
EN 13924:2006 Bitum
EN and bituminous binders - Specifications for hard paving grade bitumens
EN 13924:2006/AC:2006
EN 13950:2014 Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods
EN 13956:2012 Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics
EN 13963:2005 Jointing materials for gypsum plasterboards - Definitions, requirements and test methods
EN 13963:2005/AC:2006
EN 13964:2014 Suspended ceilings - Requirements and test methods
EN 13967:2012 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
EN 13969:2004 Flexible sheets for waterproofing - Bitum
EN damp proof sheets including bitum
EN basement tanking sheets - Definitions and characteristics
EN 13969:2004/A1:2006
EN 13970:2004 Flexible sheets for waterproofing - Bitum
EN water vapour control layers - Definitions and characteristics
EN 13970:2004/A1:2006
EN 13978-1:2005 Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
EN 13984:2013 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics用于建筑水汽控制层的塑料和橡胶柔性板的特性和定义, 防水卷材认证
EN 13986:2004+A1:2015 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking建筑用木质板条（木基板，人造板）.特性、合格评定和标记
EN 14016-1:2004 Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements
EN 14023:2010 Bitum
EN and bituminous binders - Specification framework for polymer modified bitumens
EN 14037-1:2016 Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 1: Pre-fabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements hgcert
EN 14041:2004 Resilient, textile and laminate floor coverings - Essential characteristics
EN 14041:2004/AC:2006
弹性、纺织和强化地板检测及CE认证 ，壁纸认证，PVC地板认证，华盖认证
EN 14055:2010 WC and urinal flushing cisterns
EN 14063-1:2004 Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation
EN 14063-1:2004/AC:2006热绝缘材料产品.现场成形膨胀粘土轻集料
EN 14064-1:2010 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation
建筑物隔热产品 - 现场成型松散填充矿棉（MW）产品 - 第1部分：安装前松散填充产品规范
EN 14080:2013 Timber structures - Glued laminated timber and glued solid timber - Requirements
木结构.胶合层压板.要求
EN 14081-1:2005+A1:2011 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
木结构 - 强度分级与矩形截面结构木材- 第1部分:通用要求
EN 14178-2:2004 Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
热钢化硼硅酸盐安全玻璃CE认证
EN 14179-2:2005 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
建筑用吸热热钢化钙纳硅酸盐玻璃出口到欧盟市场需要强制进行CE认证
EN 14188-1:2004 Joint fillers and sealants - Part 1: Specifications for hot applied sealants
填缝剂和填缝胶--第1部分: 热熔型密封胶技术规范
EN 14188-2:2004 Joint fillers and sealants - Part 2: Specifications for cold applied sealants
适用于常温型普通或防油型道路填缝密封胶的技术规范要求
EN 14188-3:2006 Joint fillers and sealants - Part 3: Specifications for preformed joint seals
接缝填充物和密封胶.预成型的接缝密封件规范
EN 14190:2014 Gypsum board products from reprocessing - Definitions, requirements and test methods
石膏板产品CE认证
EN 14195:2005 Metal framing components for gypsum plasterboard systems - Definitions, requirements and test methods
石膏板系统用金属框架元件.定义、要求和试验方法，龙骨CE认证
华盖认证
EN 14195:2005/AC:2006
EN 14209:2017 (new) Preformed plasterboard cornices - Definitions, requirements and test methods
EN 14216:2015 Cement - Composition, specifications and conformity criteria for very low heat special cements
EN 14229:2010 Structural timber - Wood poles for overhead lines
EN 14246:2006 Gypsum elements for suspended ceilings - Definitions, requirements and test methods
EN 14246:2006/AC:2007吊顶用石膏部件CE认证
EN 14250:2010 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
木结构件
EN 14296:2005 Sanitary appliances - Communal washing troughs
EN 14303:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification
绝热产品CE认证
EN 14304:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification
绝热产品CE认证
EN 14305:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification
绝热产品CE认证
EN 14306:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification
EN 14307:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification
EN 14308:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification
EN 14309:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification
EN 14313:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
EN 14314:2009+A1:2013 Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification
EN 14315-1:2013 Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam spray system before installation
EN 14316-1:2004 Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation
EN 14317-1:2004 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
EN 14318-1:2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation
EN 14319-1:2013 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam dispensed system before installation
EN 14320-1:2013 Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam spray system before installation
EN 14321-2:2005 Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard玻璃制品CE认证
EN 14339:2005 Underground fire hydrants
EN 14342:2013 Wood flooring and parquet - Characteristics, evaluation of conformity and marking
木地板CE认证
EN 14351-1:2006+A2:2016 Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
门窗CE认证
EN 14353:2007+A1:2010 Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
EN 14374:2004 Timber structures - Structural laminated veneer lumber - Requirements
EN 14384:2005 Pillar fire hydrants
EN 14388:2005 Road traffic noise reducing devices - Specifications
EN 14388:2005/AC:2008
EN 14396:2004 Fixed ladders for manholes
修理用梯子CE认证
EN 14399-1:2015 High-strength structural bolting assemblies for preloading - Part 1: General requirements
预紧高强螺栓CE认证
EN 14411:2012 Ceramic tiles - Definitions, classification, characteristics, evaluation of conformity and marking
EN 14428:2004+A1:2008 Shower enclosures - Functional requirements and test methods
EN 14449:2005 Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
玻璃CE认证
EN 14449:2005/AC:2005
EN 14471:2013+A1:2015 Chimneys - System chimneys with plastic flue liners - Requirements and test methods
烟囱CE认证
EN 14496:2005 Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards - Definitions, requirements and test methods
EN 14509:2013 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
金属绝缘板CE认证
EN 14516:2006+A1:2010 Baths for domestic purposes
EN 14527:2006+A1:2010 Shower trays for domestic purposes
淋浴盆CE认证
EN 14528:2007 Bidets - Functional requirements and test methods
EN 14545:2008 Timber structures - Connectors - Requirements
木结构连接件CE认证
EN 14566:2008+A1:2009 Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods
石膏板用机械紧固件CE认证
EN 14592:2008+A1:2012 Timber structures - Dowel-type fasteners - Requirements
EN 14604:2005 Smoke alarm devices
EN 14604:2005/AC:2008烟雾报警装置CE认证
EN 14647:2005 Calcium aluminate cement - Composition, specifications and conformity criteria
EN 14647:2005/AC:2006
EN 14680:2006 Adhesives for non-pressure thermoplastic piping systems - Specifications
EN 14688:2006 Sanitary appliances - Wash basins - Functional requirements and test methods
EN 14695:2010 Flexible sheets for waterproofing - Reinforced bitum
EN sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics
防水卷材-混凝土桥面和其他混凝土交通区域的防水用加固沥青板-定义和特性。
EN 14716:2004 Stretched ceilings - Requirements and test methods
拉伸顶棚/天花膜CE认证
EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
自承重的金属板、波纹板等产品的欧盟 CE 认证
EN 14783:2013 Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
全支持金属薄板和带材屋面,外覆层和内衬- 产品规范及要求
EN 14785:2006 Residential space heating appliances fired by wood pellets - Requirements and test methods
壁炉CE认证
EN 14800:2007 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
EN 14814:2007 Adhesives for thermoplastic piping systems for fluids under pressure - Specifications
EN 14843:2007 Precast concrete products - Stairs
EN 14844:2006+A2:2011 Precast concrete products - Box culverts
EN 14846:2008 Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods
EN 14889-1:2006 Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity
EN 14889-2:2006 Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity
EN 14891:2012 Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation
EN 14891:2012/AC:2012
EN 14904:2006 Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
EN 14909:2012 Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
EN 14915:2013 Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking
EN 14933:2007 Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification
EN 14934:2007 Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification
EN 14963:2006 Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
EN 14964:2006 Rigid underlays for discontinuous roofing - Definitions and characteristics
EN 14967:2006 Flexible sheets for waterproofing - Bitum
EN damp proof courses - Definitions and characteristics
EN 14989-1:2007 Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances
EN 14989-2:2007 Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances
EN 14991:2007 Precast concrete products - Foundation elements
EN 14992:2007+A1:2012 Precast concrete products - Wall elements
EN 15037-1:2008 Precast concrete products - Beam-and-block floor systems - Part 1: Beams
EN 15037-2:2009+A1:2011 Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks
EN 15037-3:2009+A1:2011 Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks
EN 15037-4:2010+A1:2013 Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks
EN 15037-5:2013 Precast concrete products - Beam-and-block floor systems - Part 5: Lightweight blocks for simple formwork
EN 15048-1:2007 Non-preloaded structural bolting assemblies - Part 1: General requirements
EN 15050:2007+A1:2012 Precast concrete products - Bridge elements
EN 15069:2008 Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
EN 15088:2005 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
铝及铝合金技术要求
EN 15102:2007+A1:2011 Decorative wall coverings - Roll and panel form
EN 15129:2009 Anti-seismic devices
EN 15167-1:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
EN 15250:2007 Slow heat release appliances fired by solid fuel - Requirements and test methods
EN 15258:2008 Precast concrete products - Retaining wall elements
EN 15274:2015 General purpose adhesives for structural assembly - Requirements and test methods
EN 15275:2015 Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
EN 15283-1:2008+A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement
EN 15283-2:2008+A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards
EN 15285:2008 Agglomerated stone - Modular tiles for flooring and stairs (internal and external)
EN 15285:2008/AC:2008
EN 15286:2013 Agglomerated stone - Slabs and tiles for wall finishes (internal and external)
EN 15322:2013 Bitum
EN and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders
EN 15368:2008+A1:2010 Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria
EN 15381:2008 Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays
EN 15382:2013 Geosynthetic barriers - Characteristics required for use in transportation infrastructure
EN 15435:2008 Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance
EN 15497:2014 Structural finger jointed solid timber - Performance requirements and minimum production requirements
EN 15498:2008 Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance
EN 15501:2013 Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification
EN 15599-1:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation
EN 15600-1:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
EN 15650:2010 Ventilation for buildings - Fire dampers
EN 15651-1:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements
EN 15651-2:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
EN 15651-3:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
EN 15651-4:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
EN 15681-2:2017 Glass in Building - Basic alumino silicate glass products - Part 2: Product standard
EN 15682-2:2013 Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 15683-2:2013 Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard
EN 15732:2012 Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA)
EN 15743:2010+A1:2015 Supersulfated cement - Composition, specifications and conformity criteria
EN 15814:2011+A2:2014 Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements
EN 15821:2010 Multi-firing sauna stoves fired by natural wood logs - Requirements and test methods
EN 15824:2017 (new) Specifications for external renders and internal plasters based on organic binders
EN 16034:2014 Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
EN 16069:2012+A1:2015 Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification
EN 16153:2013+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
EN 50575:2014 Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire requirements
EN 50575:2014/A1:2016
电力,控制和通信电缆,光缆的施工，防火要求
电线电缆欧盟CPR认证
上海炎栩标准技术服务有限公司
ETA认证， ETAG认证，EAD认证
上海炎栩标准技术服务有限公司
